Sharp DV-NC100S, Руководство по обслуживанию

Страница: 111 / 126

2-4-1
H9740MA
DISASSEMBLY/ASSEMBLY PROCEDURES OF DECK
MECHANISM
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject mode;
see the positions of [44] and [45] in Fig. DM1H on page 2-4-3. When reassembling, follow the steps in reverse order.
No.
/LOC.
STEP
No.
ING
START-
PART
REMOVAL INSTALLATION
Fig. No.
UNPLUG/DESOLDER
UNLOCK/RELEASE/
REMOVE/*UNHOOK/
CONDITION
ADJUSTMENT
[1] [1] Guide Holder A T DM3H 2(S-1)
[2] [1]
Assembly
Cassette Holder
T DM4H
[3] [2] Slider (SP) T DM5H
(S-1A), *(L-1)
[4] [2] Slider (TU) T DM5H *(L-2)
[5] [4] Lock Lever T DM5H *(L-3), *(P-1)
[6] [2] Cassette Plate T DM5H
[7] [7] Cylinder Assembly T DM1H, DM6H Desolder, 3(S-2)
[8] [8]
Assembly
Loading Motor
T DM1H, DM7H
2(S-3)
Desolder, LDG Belt,
[9] [9] ACE Head Assembly T DM1H, DM7H
(S-4)
[10] [2]
Assembly
Tape Guide Arm
T DM1H, DM8H-1 *(P-2)
[11] [10] C Door Opener T DM1H, DM8H-1
(S-4A), *(L-4)
[12] [11] Pinch Arm (B) T
DM8H-2
DM1H, DM8H-1,
*(P-3)
[13] [12]
Assembly
Pinch Arm (A)
T
DM8H-2
DM1H, DM8H-1,
[14] [14] FE Head T DM1H, DM9H
(S-5)
[15] [15] Prism T DM1H, DM9H
(S-6)
[16] [2] Slider Shaft T DM10H *(L-5)
[17] [16] C Drive Lever (SP) T DM10H
[18] [16] C Drive Lever (TU) T DM10H
(S-7), *(P-4)
[19] [19] Capstan Motor B DM2H, DM11H 3(S-8), Cap Belt
[20] [20] Clutch Assembly (HI) B DM2H, DM12H
(C-1)
[21] [20] Center Gear B DM12H
*[22] [22] F Brake Assembly (HI) B DM2H, DM12H *(L-6)
[23] [22] Worm Holder B DM2H, DM13H-1
(S-9), *(L-7), *(L-8)
[24] [22] Pulley Assembly (HI) B DM2H, DM13H-1
[25] [25] Mode Gear (LM) B DM2H, DM13H-1
(C-2)
[26] [20],[25] Mode Lever (HI) B
DM13H-2
DM2H, DM13H-1, (C-3)
[27]
[26]
[22],[23],
Cam Gear (A) (HI) B
DM13H-2
DM2H, DM13H-1, (C-4)
Sec.Page 2-5-1
(+)Refer to Alignment
[28] [26] TR Gear C B DM2H, DM13H-1
(C-5)