Sharp DT-100, Руководство по обслуживанию

Страница: 3 / 112

3
DT-100
SPECIFICATIONS
Projector
DT-100
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480
I
/DTV480P/
DTV540P/DTV576
I
/DTV576P/DTV720P/DTV1035
I
/DTV1080
I
/DTV1080
I
-50
Single Chip Digital Micromirror Device
TM
(DMD
TM
) by Texas Instruments
Panel size: 0.53 ", 1chip
DMD
No. of dots: 409,920 dots (854 [H] 480 [V])
1–1.15 zoom lens, F2.4–2.6, f = 19.0–21.9 mm
275 W DC lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75
terminated
P
B
: 0.7 Vp-p, 75 terminated
P
R
: 0.7 Vp-p, 75 terminated
520 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
terminated
45–85 Hz
15–70 kHz
12–108 MHz
9-pin mini DIN connector
ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 k (stereo)
ø3.5 mm minijack: 0.5 Vrms, less than 2.2 k
4 cm 2.85 cm oval 1
AC 100–240 V
3.6 A
50/60 Hz
350 W (Lamp Setting “Bright”)/
305 W (Lamp Setting “Eco + Quiet”) with AC 100 V
330 W (Lamp Setting “Bright”)/
285 W (Lamp Setting “Eco + Quiet”) with AC 240 V
4 W (AC 100 V) – 5 W (AC 240 V)
1,315 BTU/hour (Lamp Setting “Bright”)/
1,145 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V
1,240 BTU/hour (Lamp Setting “Bright”)/
1,070 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12
13
/
32
" 4
19
/
64
" 11
1
/
32
" (315 (W) 109 (H) 280 (D) mm) (main body only)
12
13
/
32
" 4
47
/
64
" 11
37
/
64
" (315 (W) 120 (H) 294 (D) mm) (including adjust-
ment foot and projecting parts)
8.6 lbs. (3.9 kg)
Remote control, Power cord for U.S. and Canada,
3 RCA to 15-pin D-sub adaptor, Operation manual
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input
(INPUT 1/2)/output
(OUTPUT) signal
S-video input signal
(INPUT 3)
Video input signal
(INPUT 4)
Vertical frequency
Horizontal frequency
Pixel clock
RS-232C terminal
Audio input signal
Audio output signal
(AUDIO OUTPUT 1-4)
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
×
×
× ×
×
×
×
×
×
×
×
×
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω