Sharp CV-2P10SC, Инструкция по установке и эксплуатации

Страница: 19 / 60

EN-17
ENGLISH
HOW TO USE THE REMOTE CONTROL
Point the remote control toward the receiver
window and press the desired button. The unit
generates a beep when it receives the signal.
• Make sure nothing, such as curtains, blocks the
signal receiver window.
• The signal effective distance is 23 feet (7 m).
CAUTION:
• Do not expose the receiver window to direct sun-
light. This may adversely affect its operation.
• Use of certain fluorescent lamp in the same room
may interfere with transmission of the signal.
• Do not leave the remote control in direct sunlight
or near a heater. Protect the remote control from
moisture and shock.
To prevent the remote control from being
misplaced, hook it to the unit when not in
use.
When attached, to remove the remote control from
the unit, lift the remote control up slightly and pull it
out.
Remote control hook
PRE-OPERATION CHECKS
CV-2P10SC_en.indd 17 11.3.22 11:00:15 AM