6
GT
GRAND TOTAL MODE SELECTOR:
“GT”: This selector will accumulate the
following:
(“
✱
” will be printed.)
1. Addition and subtraction totals
obtained with
.
2. Product and quotient totals
obtained with
or
.
3. Results obtained using
.
“
•
”:
Neutral
PAPER FEED KEY
LAST DIGIT CORRECTION KEY
CHANGE SIGN KEY:
Changes the algebraic sign of a
number (i.e. positive to negative or
negative to positive).
NON-ADD / SUBTOTAL KEY:
Non-Add –
When this key is pressed
right after entry of a
number in the Print mode,
the entry is printed on the
left-hand side with “#”.
This key is used to print
out numbers not subject to
c a l c u l a t i o n s s u c h a s
codes, dates, etc.
Subtotal –
Used to get subtotal(s) of
additions and/or subtrac-
t i o n s . W h e n p r e s s e d
following
or
, the
subtotal is printed with “
◊
”
and the calculation may be
continued.
By pressing this key even in the
Non-print mode, the displayed
number is printed without any
symbol.
TOTAL KEY:
Prints the total of addition and
subtraction with “
✱
”.
This key also serves as a clear key for
the calculation register and resets an
error condition.
CLEAR ENTRY KEY:
Clears numbers entered prior to use of
a function key.
Also used to clear an overflow error
caused by an entry.