Sharp CP-HF100H, Руководство по эксплуатации

Страница: 16 / 30

10/7/26 XL-E100H_OM_EN.fm
E-7
Setting the clock (Remote control only)
In this example, the clock is set for the 24-hour (00:00)
display.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does
not appear in step 2, step 4 (for selecting the 24-hour or
12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or the
device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio
code which is processed by significant compression
from the original audio source with very little loss in
sound quality.
z This system supports MPEG 1 Layer 3 and VBR files.
z During VBR file playback, time counter in the display
may differ from its actual playback time.
z Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that
include audio files which are compressed with
Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media
Player.
z “MP3” and “WMA” indicator will light up after the unit
reads information on an MP3 or WMA disc.
z Bitrate which is supported by WMA is 64 ~ 160 kbps.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the ENTER button. To adjust
the day, press the or button and then press the
ENTER button.
4
Press the or button to select 24-hour or 12-
hour display and then press the ENTER button.
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 00:00 - PM 11:59)
5
To adjust the hour, press the or button and
then press the ENTER button. Press the or
button once to advance the time by 1 hour. Hold it
down to advance continuously.
6
To adjust the minutes, press the or button and
then press the ENTER button. Press the or
button once to advance the time by 1 minute.
1
Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 19 for details.]
2
Perform “Setting the clock” from step 1 onwards.
RRMCGA22 RRMCGA226AW S A
„ Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press the OPEN/CLOSE button to close the disc tray.
6
Press the / (CD/USB / ) button to start playback.
After the last track is played, the unit will stop
automatically.
RRMCGA22 RRMCGA226 AWS A