E-23
ENGLISH
HT-DV40U
HT-DV50U
Preparation for Use
Changing the set up menu
Notes:
The setting are stored even if the unit is set to stand-by mode.
The backup function protects the stored setting for a few hours
should there be a power failure or AC power lead disconnection.
System set up can be performed during playback mode.
1
2
3
4
5
6
7
8
9
+10
0
1
Turn on the TV.
2
Set the TV to the correct input, eg. “AV1”, “VIDEO”, etc.
3
Turn on the unit by pressing the
ON/STAND-BY button.
The SHARP startup screen appears.
Note:
Startup screen will be displayed when
S-Video cable is connected to the TV. If
only the S-Video cable is connected, the
screen may be blank. To set up S-Video
mode, use video out cable.
4
Press the SHIFT and SET UP buttons.
5
Press the
or
button to select a menu.
See the list on pages 24 - 29 for set up menu.
6
Press the
, ,
or
button to change the setting and
press the ENTER button.
7
After setting is completed, select
“EXIT SET UP”, then press the ENTER
button to return to the main page.
Содержание CP-DV40
Страница 64: ...D CINEMA DOWN ...