E-41
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
F
S
V
I
N
P
E
E
HT-CN410DVH
Radio Operation
- Listening to the radio -
Listening to the radio
Manual or Auto tuning
When an FM stereo broadcast is received...
"STEREO" will appear.
If the FM reception is weak, press the ST/MO button to extinguish the "STEREO"
indicator. The reception changes to monaural, and the sound becomes clearer.
Note:
The sound is produced in 2-channel stereo whilst receiving radio broadcasts.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION (FM/AM) button repeatedly to select the
desired frequency band.
3
Press the
or
(TUNING
4
or
3
) button for a few seconds to
tune in to the desired station.
Manual tuning:
Press the
or
(TUNING
4
or
3
) button as many times as required to tune
in the desired station.
Auto tuning:
When the
or
(TUNING
4
or
3
) button is pressed for 0.5 seconds or
more, scanning will start automatically and the tuner will stop at the first receiv-
able broadcast station.
When radio interference occurs, auto scan tuning may stop automatically at
that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the
or
(TUNING
4
or
3
) button again.
FM stereo receiving indicator
A - B
REPEAT 1
SLEEP
PROG
CHP
PRESET
TRK
TITLE
KHz
CD MP3
V
DIGITAL
Pro Logic
RS
LS
C
R
L
S
MHz
STEREO
A - B
REPEAT 1
SLEEP
PROG
CHP
PRESET
TRK
TITLE
MHz
CD MP3
STEREO V
DIGITAL
Pro Logic
RS
LS
C
R
L
S
KHz
FM
AM
A - B
REPEAT 1
SLEEP
PROG
CHP
PRESET
TRK
TITLE
KHz
CD MP3
V
DIGITAL
Pro Logic
RS
LS
C
R
L
S
MHz
STEREO
