![Sharp CD-SW200H Скачать руководство пользователя страница 39](http://html.mh-extra.com/html/sharp/cd-sw200h/cd-sw200h_operation-manual_372910039.webp)
26/4/05
CD-SW200H(H)_EN.fm
E-28
CD-SW200H
TINSZA165AWZZ
8
1
2
3
4
5
6
7
ENGLISH
Ta
pe
Re
cording
Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Recording from the radio
To interrupt recording:
Press the
button.
To resume recording, press the / (TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop aerial.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1 Perform steps 1 - 5 in "Recording from a CD or MP3/WMA disc"
on page 27.
2 Within 5 seconds, press the
/
(TAPE
) button to start recording.
1 Program discs and tracks (see page 18).
2 Press the
button.
3 Press the / (TAPE ) button to start recording.
1
Tune in to the desired station (see page 23).
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button.
Recording will be paused.
4
Press the / (TAPE ) button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into
the TAPE 1 cassette compartment.
Insert a blank tape into the TAPE 2
cassette compartment.
It is recommended that the recording
tape is the same length as the master
tape.
3
Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
4
Press the
button.
Recording will be paused.
5
Press the / (TAPE ) button to start dubbing.
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1 2) button until "TAPE 2" appears on the
display.
3 Press the
button.
4 Press the / (TAPE ) button to start erasing.
TAPE 1
TAPE 2