background image

E-39

ENGLISH

CD-MPX880H

References

Troubleshooting chart

Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

General

 

CD player

Cassette deck

Remote control

Tuner

Symptom

Possible cause

The clock is not set to the 
correct time.

Did a power failure occur? Reset 
the clock. (Refer to page 11.)

When a button is pressed, 
the unit does not respond.

Set the unit to the power stand-
by mode and then turn it back on.

If the unit still malfunctions, reset 
it. (Refer to page 40.)

No sound is heard.

Is the volume level set to “0”?

Are the headphones connected?

Are the speaker wires                 
disconnected?

Symptom

Possible cause

Playback does not start.

Is the disc loaded upside down?

Playback stops in the  
middle or is not performed 
properly.

Does the disc satisfy the          
standards?

Is the disc distorted or 
scratched?

Playback sounds are 
skipped, or stopped in the 
middle of a track.

Is the unit located near excessive 
vibrations?

Is the disc very dirty?

Has condensation formed inside 
the unit?

Symptom

Possible cause

Cannot record.

Is the erase-prevention tab 
removed?

Cannot record tracks with 
proper sound quality.

Is it a normal tape? (You cannot 
record on a metal or CrO  tape.)

Cannot erase completely.

Sound skipping.

Is there slack in the tape?

Cannot hear treble.

Is the tape stretched?

Sound fluctuation.

Are the capstans, pinch rollers, 
or heads dirty?

Cannot remove the tape.

If a power failure occurs during 
playback, the heads remain 
engaged with the tape. Do not 
open the compartment with great 
force.

Symptom

Possible cause

The remote control does 
not operate.

Is the AC power lead of the unit 
plugged in?

Is the battery polarity correct?

Are the batteries dead?

Is the distance or angle 
incorrect?

Does the remote control sensor 
receive strong light?

Symptom

Possible cause

The radio makes unusual 
noises continuously.

Is the unit placed near the TV or 
computer?

Is the FM aerial or AM loop aerial 
placed properly? Move the aerial 
away from the AC power lead if 
it's located nearby.

Содержание CD-MPX880H






















































Отзывы: