CD-BK100W/CD-BP90W
– 10 –
1
Top Cabinet
1. Screw ...................... (A1) x4
10-1
2
Side Panel
1. Screw ...................... (B1) x8
10-1
(Left/Right)
3
CD Tray Cover/
1. Turn on the power supply, ..
10-2
CD Player Unit
open the disc tray, take out
the CD tray cover, and close.
(Note 1)
2. Hook ........................ (C1) x3
3. Screw ...................... (C2) x1
4. Hook ........................ (C3) x2
5. Socket ..................... (C4) x2
4
Rear Panel
1. Screw ...................... (D1) x6
10-2
5
Front Panel
1. Flat Cable ............... (E1) x1
11-3
2. Socket ..................... (E2) x4
(For CD-BK100W)
2. Socket ..................... (E2) x3
(For CD-BP90W)
3. Tip ........................... (E3) x1
4. Screw ...................... (E4) x3
5. Hook ........................ (E5) x2
6
Main PWB
1. Socket ...................... (F1) x2
11-3
2. Screw ....................... (F2) x7
7
Mic PWB
1. Screw ...................... (G1) x1
11-4
(CD-BK100W Only) 2. Bracket .................... (G2) x1
8
Display PWB
1. Screw .................... (H1) x11
11-4
2. Flat Wire .................. (H2) x1
9
Headphones PWB 1. Screw ....................... (J1) x1
11-4
2. Bracket ..................... (J2) x1
10
Tape Mechanism 1. Open the cassette holder. ..
11-4
2. Screw...................... (K1) x6
11
Turntable
1. Hook ......................... (L1) x2
11-5
2. Cover ....................... (L2) x1
12
Disc Tray
1. Turn fully the lock lever in the
11-1
arrow direction.
2. While holding the lock lever,rotate
11-2
the cam gear until the cam gear
rib engages with the clamp lever.
3. Push the slide chassis backward
11-6
to engage the claw with the
groove and remove it in the
direction of the arrow. . (M1) x6
13
CD Servo PWB
1. Screw ...................... (N1) x1
12-1
(Note 2)
2. Socket ..................... (N2) x4
3. Hook ........................ (N3) x2
14
CD Mechanism
1. Hook ........................ (P1) x2
12-2
2. Hook ........................ (P2) x3
DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
Figure 10-2
CD-BK100W/CD-BP90W
STEP
REMOVAL
PROCEDURE
FIGURE
Figure 10-1
Note 1: How to open the changer manually. (Fig. 11-1)
1. In this state, turn fully the lock lever in the arrow direction through
the hole on the loading chassis bottom.
2. While holding the lock lever, rotate the cam gear anticlockwise until the
cam gear rib engages with the clamp lever. (Fig. 11-2)
3. After that, push forward the slide chassis.
Note 2:
1. After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.
Note 3:
1. Be careful not to break the claw of the CD mechanism.
2. When fining back the cam gear assembly, let it lock by front
movement.
Illustration: CD-BK100W
CD-BK100W/CD-BP90W
(B1)x2
ø3x7mm
(B1)x2
ø3x7mm
Rear
Panel
CD-BK100W
ONLY
(B1)x2
ø3x7mm
Side Panel
(Right)
Side Panel
(Left)
(A1)x2
ø3x12mm
(A1)x2
ø3x12mm
Top Cabinet
(B1)x2
ø3x10mm
Pull
Pull
(C3)x1
(C4)x2
CD Servo
PWB
CD Tray Cover
(C1)x3
1
1
2
(C3)x1
CD Player
Unit
(D1)x5
ø3x10mm
(C2)x1
ø3x10mm
Rear
Panel
CD-BK100W
ONLY
(D1)x1
ø3x7mm
Содержание CD-BK100W
Страница 54: ...CD BK100W CD BP90W 54 M E M O ...