A41601 SEC R-315J O/M
17
TINSEB037WRRZ-D41 SEC R315J
AUDIBLE SIGNAL
ELIMINATION
If you wish to have the oven operate with no audible
signals, touch
TIMER/CLOCK
, the number 5 and
then touch the
START
pad and hold for three seconds.
To cancel, touch
TIMER/CLOCK
, the number 5 and
STOP/CLEAR
pads.
DEMONSTRATION MODE
To demonstrate, touch
TIMER/CLOCK
, the number 0
and then touch the
START
pad and hold for 3 seconds.
S HO
will appear in the display. Cooking operations
and specific special features can now be demonstrated
with no power in the oven. For example, touch
MINUTE
PLUS
pad and the display will show
1.00
and count
down quickly to
.
To cancel, touch
TIMER/CLOCK
, the number 0 and
STOP/CLEAR
pads. If easier, unplug the oven from
the electrical outlet and replug.
O T H E R C O N V E N I E N T F E A T U R E S
Exterior
Interior
Disconnect the power cord before cleaning or leave the door
open to inactivate the oven during cleaning.
Exterior
The outside surface is painted. Clean the outside with mild soap
and water. Then wipe with a clean dampened cloth and polish
dry with a soft cloth. Do not use any type of household or abra-
sive cleaner.
Door
Wipe the window on both sides with a soft damp cloth to remove
any spills or spatters. Metal parts will be easier to maintain if wiped
frequently with a soft damp cloth. Avoid the use of spray and other
harsh cleaners as they may stain, streak or dull the door surface.
Touch Control Panel
Wipe the panel with a soft cloth dampened slightly with water
only. Dry with a soft cloth. Do not scrub or use any sort of chemi-
cal cleaners. Close door and touch
STOP/CLEAR
pad.
Interior
Cleaning is easy because little heat is generated to the interior
surfaces; therefore, there is no baking and setting of spills or
spattering. To clean the interior surfaces, wipe with a soft damp
cloth. DO NOT USE ABRASIVE OR HARSH CLEANERS OR
SCOURING PADS. For heavier soil, use baking soda or a mild
soap; wipe clean with a soft damp cloth. NEVER SPRAY OVEN
CLEANERS DIRECTLY ONTO ANY PART OF THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so requires special care. Keep
the waveguide cover clean to assure good oven performance. Carefully
wipe with a soft damp cloth any food spatters from the surface of the
cover immediately after they occur. Built-up splashes may overheat and
cause smoke or possibly catch fire. Do not remove the waveguide cover.
Odor Removal
Occasionally, a cooking odor may remain in the oven. To re-
move, combine 1 cup water, grated peel and juice of 1 lemon
and several whole cloves in a 2-cup glass measuring cup. Boil
for several minutes using 100% power. Allow to set in oven until
cool. Wipe interior with a soft cloth.
Turntable / Turntable Support
The turntable and turntable support can be removed for easy cleaning.
Wash them in mild, sudsy water; for stubborn stains use a mild cleanser
and a non-abrasive scouring sponge. They are also dishwasher-proof.
Use upper rack of dishwasher. The turntable motor shaft is not sealed,
so excess water or spills should be wiped up immediately.
C L E A N I N G A N D C A R E
Turntable
Turntable Support
SEC R315J O/M,P15-21
04.4.20, 10:13 AM
17
