SW
NO.
Data
NO.
Item
Switch selection and contents of functions
Initial value
User
program
No.
Remark
SW28
1
Reserved
0
2
Reserved
0
3
Reserved
0
4
Reserved
0
5
Reserved
0
6
Reserved
0
7
Reserved
0
8
Standard
reading setup
Read mode setup in the standard mode
Reading
Fine
mode
0
SW29
1
Reserved
0
2
Reserved
0
3
Reserved
0
4
Reserved
0
5
Number of call
rings
Used to set the number of call rings until reception is
started in auto reception mode. The set range is 0 – 9
times by binary input. When set to 0, no ring is made.
2 times
0
117
When set to 10
or more times,
set to 2.
6
0
7
1
8
0
SW30
1
Report output
when canceling
Used to set whether the user cancel report is outputted
or not when canceling document transmission.
Not output
0
2
Reserved
0
3
Rotation print
Used to set Enable/Disable of rotation print when the
received document can be printed by rotation.
Enable
1
4
Dept.
management
Used to set Enable/Disable of FAX using dept.
management by the use of the dept. management
function.
Disable
0
101
If the dept.
code is not set,
Enable cannot
be selected.
5
Default date,
transmitter print
Used to set whether the transmitter information registered
in the transmitter registration and data and time are
printed in the upper fringe of the transmitted documents
or not.
ON
1
6
Reserved
0
7
Date/Transmitter
print position
setup
Used to set the print position of date and transmitter
information on the transmitted documents. If set to
“Upper inside of document”, images may be deleted.
Outside
of
document
0
140
8
Report output
(Confidential
reception)
Used to set whether the communication report table is
outputted or not when a confidential reception is made.
1
1: cm50% (Standard
mode is read as
Standard mode.)
0: Without cm50%
(Standard mode is read
as Fine mode.)
SW29 Bit No.
5 6 7 8
Set range
0 – 9 times (Binary input)
1: Output
0: Not output
1: Enable
0: Disable
1: Enable
0: Disable
1: ON
0: OFF
1: Upper inside of
document
0: Outside of document
1: Print
0: Not print
AR-FX2
6 – 12
