Sharp AR-FX12 Скачать руководство пользователя страница 10

Страница: 10 / 122

AR-FX12 UNPACKING AND INSTALLATION 5-1

[5] UNPACKING AND INSTALLATION

<Before installation>

• For installation of AR-FX12, the control PWB unit and the scanner unit

must have been installed.

• Start installation after checking that the COMMUNICATION indictor on

the operation panel is neither lit nor blinking.

Then remove the power plug of the main unit from the outlet.

<1>Remove the scanner cable from the control PWB unit.

<2>Remove the five screws that secure the control PWB unit to the main

unit.

<3>Hold the two grips and pull out the control PWB unit until it is stopped

by the stopper.

<4>Remove the connector of the flat cable.
<5>While unlocking the stopper with your finger, pull the control PWB

unit to remove it from the main unit.

Remove the two screws that secure the FAX I/F cover of the control
PWB unit and remove the FAX I/F cover.

<Procedure for mounting additional memory (AR-MM9)>

* If mounting of additional memory is not needed, proceed to step 5.

Mount the additional memory to the socket located on the back side

of the interface PWB unit.

Connect the fax interface PWB unit to the fax interface PWB

connector (100 pins) of the control PWB unit and secure it with two

screws C.

<1>Reattach the control PWB unit to the main unit.

<2>Connect the flat cable that has been removed in step 2)-<4> to the

connector.

<3>Push the control PWB unit into the main unit and secure it with the

five screws.

1)Turn off the power switch of the main unit.

2)Pull out the control PWB unit.

3)Remove the FAX I/F cover.

4)Mount the additional memory.

5)Attach the fax interface PWB unit.

6)Reattach the control PWB unit.

[05]UNPACKINGANDINSTALLATION.fm 1

ページ

２００４年１０月２６日　火曜日　午後３時４３分

Содержание AR-FX12



























































































































Результаты поиска

Содержание AR-FX12

Отзывы:

Sharp AR-FX12, Руководство по обслуживанию, Страница: 10 / 122

Результаты поиска

Содержание AR-FX12

Отзывы: