4-5
CHAPTER
4
The message “
TONER SUPPLY IS LOW.
” will appear in
the message display before the toner supply is completely empty.
(
indicate toner types.
Y
: yellow,
M
: magenta,
C
: cyan,
BK
:
black) If copying is continued, copies will gradually become lighter until
the copier stops and the message display changes to “
ADD
TONER.PRESS
.
” indicating that the toner supply is empty. Toner
can be added any time after the message “
TONER SUPPLY IS
LOW.
” appears. To add toner, stop the copier and proceed as below.
When either message appears, you can use the INFORMATION key
for detailed information as necessary.
If any color toner supply is empty, color copying cannot be performed.
However, black/white copying can be performed unless the black
toner supply is empty.
During long copy runs of multiple originals containing many images
and/or dark shades, “
TONER REPLENISHMENT IN PROGRESS.
” may
appear and the copier may stop making copies even though toner is
left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START key indicator will light up. Press the
START key to resume copying.
SUPPLIES
Adding toner
ADDING TONER
For best copying results, be sure to use
only Sharp Genuine Supplies which are
designed, engineered, and tested to
maximize the life and performance of
Sharp copiers.
Look for the Genuine Supplies label on
the toner package.
1
Open the front cover.
2
Push the lock release buttons on both sides of the toner
box and pull the toner box out slowly until it stops.
●
The toner hoppers are located as below.
GENUINE SUPPLIES
Yellow
Cyan
Magenta
Black
