manualshive.com logo in svg

Sharp AR-5015, Руководство по эксплуатации

Поделиться
Скачать
Sharp AR-5015 Скачать руководство пользователя страница 29

27

MAKING COPIES

High image quality mode

HIGH IMAGE QUALITY MODE

This mode improves copy image quality in the automatic and manual
exposure modes by increasing copy density with a slight increase of toner
consumption. Selection of this mode does not affect the PHOTO mode.
Follow the procedure below for setting the toning level.

1

Press the AUTO/MANUAL/PHOTO (

/

/

) key to

select the MANUAL (

) mode.

2

Press and hold down the AUTO/MANUAL/PHOTO (

/

/

) key for approximately 5 seconds.

●

The MANUAL (

) indicator will go out and the PHOTO (

)

indicator will begin to blink.

●

The exposure indicator marked “1” will light up, indicating that the
standard toner mode is active.

3

To enter the high image quality mode, press the dark
(

) key.

●

The exposure indicator marked “5” will light up, indicating that the
high image quality mode is selected.

4

Press the AUTO/MANUAL/PHOTO (

/

/

) key.

●

The PHOTO (

) indicator will stop blinking and will light up

steadily. The high image quality mode is now active.

●

To return to the standard mode, repeat the procedure but use the light
(

) key to select exposure level “1” in step 3.

Downloaded from: 

http://www.usersmanualguide.com/

Содержание AR-5015






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды