Sharp AR-5015 N, Руководство по обслуживанию

Страница: 5 / 25

[ 7 ] SIMULATIONS
The table below shows the changed points in simulations. (Items marked with* are changed.)
Main
code Sub
code
Contents Details of operation Initial value Set range
21 1 Maintenance cycle
setting Used to display the currently set maintenance cycle at the numbers
shown at right. When the set value is entered and the start key is
pressed, the set value is stored. 2* 0~7*
Key operation/Display
0: 2500 sheets 4: 150000 sheets
1: 5000 sheets 5: FREE (999999 sheets)
2: 25000 sheets* 6: 10000 sheets
3: 50000 sheets* 7: 7500 sheets
21 2 Mini maintenance
cycle setting Used to display the currently set mini maintenance cycle at the numbers
shown at right. When the set value is entered and the start key is
pressed, the set value is stored. 4 0~4*
Key operation/Display
0: 2500 sheets 4: 50000 sheets
1: 5000 sheets
2: 10000 sheets
3: FREE (999999 sheets)
26 6 Destination setting Used to display the current destination setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored. 7 0~13
Key operation/Display
0: Japan 8: EX AB series
1: USA (Inch series) 9: EX inch series (FC conformity)
2: Canada (Inch series) 10: EX AB series (FC conformity)
3: Germany 1 (AB series) (Australia, Newzealand)
4: UK (AB series) 11: China (AB series)
5: Not used 12: Taiwan (AB series)
6: France (AB series) 13: Germany 2 (AB series)
7: EX inch series
26 10 Model name input* Used to display and register the model name. 1 0~1
Key operation/Display
0: ARS140 1: AR5015
30 1 Machine sensor
operation check Used to check the sensor in the machine transport system with LED on
the operation panel.
Display
<Lighting at sensor ON>
Paper entry sensor : Machine position JAM LED
Duplex sensor : Manual feed tray position LED
Paper exit sensor : JAM LED