manualshive.com logo in svg

Sharp AR-206, Руководство по эксплуатации

Поделиться
Скачать
Sharp AR-206 Скачать руководство пользователя страница 29

27

MAKING COPIES

1

Press the AUTO/MANUAL/PHOTO key to select the
PHOTO mode.

2

Press and hold down the AUTO/MANUAL/PHOTO key
for approximately 5 seconds.

●

The PHOTO indicator will go out and the AUTO indicator will begin
to blink.

●

One or two exposure indicators corresponding to the current auto-
matic exposure level will light up. The factory default setting is level
“3”.

3

Press the light (

) or dark(

) key to lighten or darken

the automatic exposure level as desired.

4

Press the AUTO/MANUAL/PHOTO key.

●

The AUTO indicator will stop blinking and will light up steadily.

●

This automatic exposure level will remain in effect until you change
it again by this procedure.

Automatic exposure adjustment

AUTOMATIC EXPOSURE ADJUSTMENT

The automatic exposure level can be adjusted to suit your copying needs.
This level is set for copying from the original table and copying from the
optional SPF or RSPF respectively. To set the level for the optional SPF or
RSPF, place an original in the document feeder tray and make sure that the
SPF indicator lights up before proceeding to step 1. To set the level for the
original table, ensure that the SPF indicator does not light up.

p13-p27_206.p65

7/12/00, 12:05

27

Содержание AR-206

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды