15
2
Making copies
NORMAL COPYING
D. When copying in the two-sided to one-sided mode:
Use the original to copy key to select the two-sided to one-sided copying mode.
The originals must have been set in the RSPF in step 3.
Ensure that the desired paper tray is selected.
●
Paper sizes that can be used in the duplex mode are letter, legal, and invoice.
(When copying from the original table in the duplex mode, only A4 (8-1/2" x
11") size paper can be used.)
●
The bypass tray cannot be used in the duplex mode.
Set the number of copies using the two copy quantity (
,
) keys when copying
from the original table or copying in a 1-sided copy mode from the RSPF.
●
Press the clear (
) key to clear an entry if a mistake is made.
●
A single copy can be made with the initial setting, i.e., when “0” is displayed.
●
Press the right copy quantity key to set the units
digit from 0 to 9. This key will not change the tens
digit.
●
Press the left copy quantity key to set the tens
digit from 1 to 9.
Press the print (
) key.
●
To display the number of copies made in a continuous run, press the left copy
quantity key.
●
To stop copying in the middle of a run, press the clear (
) key. Copying will
stop and the number in the display will be reset to “0”.
Tens digit
Units digit
A
B
C
D
Содержание AR-155
Страница 53: ...MEMO ...
Страница 54: ...MEMO ...
Страница 56: ...1999 SHARP CORPORATION PRINTED IN CHINA 2000C KS TINSE0369QSZZ AR 155 AR 155N SHARP CORPORATION ...