Sharp AQUOS SH-02L, Инструкция по эксплуатации

Страница: 156 / 242

Security
You can make settings for the security lock.
1
In the standby screen,
z
▶ [Settings] ▶
[Security]
2
Select an item
„
Security key setting : For details
☞
P. 157
"Security key setting"
„
Screen lock : Make settings for the unlock method
for when the power or the main display is turned on.
„
Restrict calls : For details
☞
P. 154 "Restrict
calls"
„
Advanced settings : For details
☞
P. 157
"Advanced settings"
[Screen lock]
z
If you enter wrong security keys five times
continuously, you cannot enter it for 30 seconds.
z
The setting items are as follows.
„
None: The lock screen is not displayed.
„
Lock No.: Set four- to sixteen-digit number.
„
Password: Set four- to sixteen-digit alphanumeric
and half-width symbols
* including at least one or
more alphabets.
* Some half-width symbols are not available.
If you forget the lock number/password, contact a
docomo shop.
Unlocking when the handset starts up
z
When the screen lock is set to other than [None], you
can set whether to unlock the screen when the
handset starts up.
z
If unlocking the screen upon turning the power on and
you enter lock number/password incorrectly 10 times
and 20 times in a row, the handset will no longer
accept input until you turn the handset off and back
on. Entering incorrectly 30 times in a row will initialize
the handset. Use caution.
Restrict calls
You can set not to make calls.
1
In the standby screen,
z
▶ [Settings] ▶
[Security] ▶ [Restrict calls]
2
Enter the security key ▶ [Restrict calls]
z
If you have set Restrict calls, you need to enter the
security key to temporarily disable the restriction.
z
You can call to the emergency number (110, 119 or
118) even when you set Restrict calls.
154
Handset Settings