Sharp Aquos SH-02K, Инструкция по эксплуатации

Страница: 141 / 225

„
PIN code
A docomo nano UIM card has a security code called PIN
code. This security code is set to [0000] by default but
you can change the code (
☞
P. 139"Set up SIM card
lock").
The PIN code is a four- to eight-digit security code that
needs to be entered for recognizing the user of the
handset every time a docomo nano UIM card is inserted
or when a device is turned on to prevent unauthorized
use of the docomo nano UIM card by a third party.
Making/Receiving a call and the device operation are
enabled by entering PIN code.
z
Use the previously set PIN code when inserting a
docomo nano UIM card that has been used in another
device. It is [0000] if the setting has not been
changed.
z
If you enter wrong PIN codes three times continuously,
it is locked and the docomo nano UIM card becomes
unavailable. In this case, unlock with "PUK" (PIN Unlock
Key).
„
PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to
disable the PIN code lock. You cannot change the code.
z
If you enter wrong codes 10 times continuously, the
docomo nano UIM card is completely locked. In this
case, contact a docomo Shop.
Security key setting
1
In the standby screen,
z
▶ [Settings] ▶
[Security] ▶ [Secrecy key setting]
2
Enter the passcode
z
When an information screen is displayed, select
[OK].
3
Select an item
„
Passcode : Set four- to sixteen-digit number.
„
Password : Set four to sixteen alphanumerics or
half-width symbols * including at least one alphabet.
* Some half-width symbols are not available.
Set up SIM card lock
You can make settings for the PIN code.
1
In the standby screen,
z
▶ [Settings] ▶
[Security] ▶ [Set up SIM card lock]
2
Select an item
„
Lock SIM card : Set whether to enter the PIN code
when the power is turned on.
„
Change SIM PIN : Change the PIN code.
z
In Japan, you cannot make a call to the emergency
number (110, 119 or 118) when a docomo nano UIM
card is not inserted, while the PIN code is locked,
from the PUK (PIN Unlock Key) entry screen.
z
The setting is saved on the docomo nano UIM card.
139
Handset Settings