Sharp Aquos R3, Руководство пользователя

Страница: 114 / 175

112
Handset Settings
Mobile network
1
In the home screen, display “app list screen”
▶
[Settings]
▶
[Network & internet]
▶
[Mobile
network]
2
Select a nanoSIM Card
z If two nanoSIM Cards are inserted, touch the tab on the
screen top and select the nanoSIM Card you wish to set.
3
Select an item
„ Mobile data : Set whether to access data via mobile
networks.
„
Roaming : Set whether to connect to a data service at the
time of roaming.
„
App data usage : For details on app data usage
☞
P. 113
“Data usage”
„ Enhanced 4G LTE Mode : Set whether to use VoLTE.
„
Preferred network type : Set a network to use.
„
Automatically select network : Set whether to automatically
detect and switch to an available network.
„
Network : When [Automatically select network] is set to OFF,
you select a network manually.
„ Access Point Names : Set and check an access point.
„ Setting an access point
Set an access point* to connect to the Internet.
z
Access points supported by some network operators have been
pre-registered in this handset. When the power is turned ON with
a nanoSIM Card inserted, access points are automatically set.
z
If a supported access point is not registered in this handset, you
can additionally set the access points. After that, upon power
ON, the handset will connect to the access point.
* Depending on the network operator, it is called “APN” or “Access
Point Name”.
1
In the home screen, display “app list screen”
▶
[Settings]
▶
[Network & internet]
▶
[Mobile
network]
2
Select a nanoSIM Card
z
If two nanoSIM Cards are inserted, touch the tab on the
screen top and select the nanoSIM Card you wish to set.
3
[Advanced]
▶
[Access Point Names]
z You can check an access point in use.
4
[ ]
5
[Name]
▶
enter the name of the network profile
to create
▶
[OK]
6
[APN]
▶
enter the access point name
▶
[OK]
7
Enter other items required by network operators
▶
[ ]
▶
[Save]