Sharp Aquos R3, Руководство пользователя

Страница: 115 / 175

113
Handset Settings
„ Resetting an access point
Reset the access point settings to the default state.
1
In the home screen, display “app list screen”
▶
[Settings]
▶
[Network & internet]
▶
[Mobile
network]
2
Select a nanoSIM Card
z
If two nanoSIM Cards are inserted, touch the tab on the
screen top and select the nanoSIM Card you wish to set.
3
[Advanced]
▶
[Access Point Names]
4
[ ]
▶
[Reset to default]
z If you fail to make automatic setting of an access point due to
signal status such as outside the service area, you are required
to set the access point again manually.
Data usage
You can check the data usage volume via mobile networks or
Wi-Fi networks. Also, you can set limit.
1
In the home screen, display “app list screen”
▶
[Settings]
▶
[Network & internet]
▶
[Data usage]
z
The data communication volume via mobile networks is
displayed.
z When two nanoSIM Cards are inserted, the mobile network
settings are displayed for the respective nanoSIM Card.
2
Select an item
„ Data Saver : Suppress the data usage volume by pausing
data transmission in the background of some apps.
y
For apps whose data communication is not restricted even
during Data Saver, you can set it from [Unrestricted data].
„ Mobile data : Set whether to use the data communication via
mobile networks.
„
App data usage : Display the data usage volume via mobile
networks on a diagram. Also, you can check apps having
used data communication.