26
Basic adjustment settings
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press
a
/
b
to select “No Signal Off”, and
then press
ENTER
.
Press
c
/
d
to select “Enable”, and then
press
ENTER
.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV program finishes, this function may not operate.
Press
c
/
d
to select “Power Control”.
Press
MENU
and the MENU screen displays.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press
a
/
b
to select “No Operation Off”, and
then press
ENTER
.
Press
c
/
d
to select “Enable”, and then
press
ENTER
.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Repeat steps 1 and 2 in
No signal off
.
2
1
Disable
Enable
3
2
1
Power control
Power control setting allows you to save energy.
Power control for AV source
Power control for PC source
Power control setting allows you to save energy.
Power management
When set, the power will automatically shut down.
Press
a
/
b
to select “Power Management”,
and then press
ENTER
.
Press
a
/
b
to select “Mode1” or “Mode2”,
and then press
ENTER
.
Description
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the TV stays off.
• The TV turns on again by pressing
TV
POWER
on the remote control unit. (See
page 14).
• If no signal inputs for 8 seconds, the TV
enters standby mode.
• When you start using the PC and the signal
inputs again, the TV turns on.
Selected item
Off
Mode1
Mode2
Repeat steps 1 and 2 in
No signal off
.
3
2
1
Off
Mode1
Mode2
NOTE
• When using a digital PC and setting “Mode2” in Power
management, the power may not turn back on
automatically even if the signal inputs again.
• If you turn off the power by disconnecting AC cord when
setting “Mode2” in power management, the TV may not
function properly after turning the power on again. In such
case, press
TV POWER
on the remote control unit.
LC-26/32GA5U(E)-22-26
05.2.28, 1:14 PM
26
