Sharp Aquos LC-52XS1E, Руководство по эксплуатации

Страница: 13 / 64

Quick guide
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Press
a
on the Display.
The initial auto installation wizard appears.
Setting the OSD language.
English
Italiano
Svenska
Press
a
/
b
/
c
/
d
to select the desired language,
and then press OK .
Selecting the location of the TV.
STORE HOME
Press
c
/
d
to select where you will use this TV,
and then press OK .
HOME: “STANDARD” will be the default value for the
“AV MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value
for the “AV MODE” setting. If the “AV MODE” is
changed, the TV will automatically switch back to
“DYNAMIC (Fixed)” when there is no signal input from
the TV or remote control unit for 30 minutes.
Setting the country.
Austria A B/G
Finland FIN B/G
Greece GR B/G
Press
a
/
b
/
c
/
d
to select your country or area,
and then press OK .
This setting screen only appears during the first
installation.
1
•
2
3
•
•
4
•
Starting channel search.
Digital Search
Analogue Search
Skip
Press
a
/
b
to select “Digital Search”, “Analogue
Search” or “Skip”, and then press
OK
.
To watch analogue broadcasts, digital broadcasts and
satellite broadcasts, you should perform the channel
search setting for each format.
If you want to search for more broadcasts, execute
“Additional Search” from the “Programme Setup”
menu (Pages 34–36).
When you select “Skip”, only “Satellite Search” will be
performed. You should perform “Digital Search” and
“Analogue Search” from “Auto installation” under the
“Setup” menu if needed.
After performing “Digital Search” or “Analogue
Search”, the screen swithes to the “Satellite Search”
setting. You should then execute “Yes” if you want to
search for the satellite channels.
“Digital Search” setting
Press
c
/
d
to select “Terrestrial” or “Cable”,
and then press OK .
Cable Terrestrial
“Terrestrial” searching
01 628.25 02 693.25 03 767.25 04 831.25
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
To abort the initial auto installation in progress, press
6
.
After searching for DVB-T channels, the screen
switches to the “Satellite Search” setting (Page
14).
NOTE
If you turn off the main power on the Display while
performing “Terrestrial” searching, the initial auto installation
wizard will not appear. The auto installation function allows
you to execute the installation again from the “Setup” menu
(Page 34).
The initial auto installation wizard will turn off if you leave
the TV unattended for 30 minutes before searching for
channels.
5
•
•
•
•
E
•
•
•
11
Confirm the following before turning
on the main power
Are the Display and AVC System connected
using the supplied HDMI cable?
Is the antenna cable connected?
Is the AC cord plugged in?
E
E
E