Sharp Aquos LC 45GD5U Скачать руководство пользователя страница 82

Страница: 82 / 89

Appendix

• LISTINGS disappeared after a

power failure.

• Some channel numbers in the TV

Guide On Screen are incorrect.

• You have not received any local

program listings.

• A program you set to record did

not record.

• The TV did not tune to a program

you scheduled with the reminder
feature.

• You set a program to “auto tune

TV” and it did not.

• You set a program with the “power

on TV” option and it did not.

Problem

Possible Solution

• You should begin to receive listings again within 24 hours.

• You can correct them using “Changing channel display” under SETUP.

Listings usually appear within 24 hours after a successful Setup.
• Check the connections between the TV, cable, antenna, and the G-LINK cable if

using a cable box.

• Verify Setup information under “Changing system settings”.
• Make sure the cable box is on, if applicable.
• Review step 3 and step 4 of “Basic Initial Setup” on page 22.

• Make sure your recorder is turned off before the recording begins.
• Make sure there is free space available for recording on the tape or recording

device.

• Check the SCHEDULE menu and verify that the program is listed, before

recording begins.

• Check the placement of the G-LINK cable in front of your recorder.

• Check the SCHEDULE menu and verify that the program is listed.
• If you have a cable box, check the G-LINK cable.

• Check the SCHEDULE menu and verify that the program is listed as a Reminder.
• Highlight the program under LISTINGS and do the following:

- Press

MENU

on the remote control.

- Use

to highlight “edit reminder”, and press

ENTER

- Verify that the “auto tune TV” option reads “yes”.

• The TV must be on at the scheduled time for “auto tune TV”.

• Check the SCHEDULE menu and verify that the program is listed as a Reminder.
• Highlight the program under LISTINGS and do the following:

- Press

MENU

on the remote control.

- Use

to highlight “edit reminder”, and press

ENTER

- Verify that the “power on TV” option reads “yes”.

• The TV must be off at the scheduled time for “power on TV”.

Troubleshooting-TV Guide On Screen

Содержание Aquos LC 45GD5U


























































































Результаты поиска

Содержание Aquos LC 45GD5U

Отзывы:

Похожие инструкции для Aquos LC 45GD5U

Бренды по названию

Популярные бренды

Sharp Aquos LC 45GD5U, Руководство по эксплуатации

Результаты поиска

Содержание Aquos LC 45GD5U

Отзывы:

Похожие инструкции для Aquos LC 45GD5U

Бренды по названию

Популярные бренды