Sharp AQUOS LC-40D68UT Скачать руководство пользователя страница 21

Страница: 21 / 74

LC-40D68UT

5 – 1

LC-40D68UT

Service Manual

CHAPTER 5.

ADJUSTMENT

[1] ADJUSTMENT PROCEDURE

The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is
required due to part replacement, make an adjustment according to the following procedure.

1. After replacement of any PWB unit and/or IC for repair, please note the following.

• When replacing the following units, make sure to prepare the new units loaded with updated software.

MAIN Unit: DUNTKF463FM02

2. Upgrading of each microprocessor software

CAUTION: Never “POWER OFF” the unit when software upgrade is ongoing.

Otherwise the system may be damaged beyond recovery.

2.1. Software version upgrade

The model employs the following software.

• Main software

• Monitor microprocessor software

The main software can be upgraded by using a general-purpose USB Memory.

The monitor microprocessor software can be upgraded with E8 Emulator Debugger.

The followings are the procedures for upgrading, explained separately for the main software, monitor microprocessor software.

2.2. Main software version upgrade

2.2.1 Get ready before you start

• USB Memory of 128MB or higher capacity.

• PC running on Windows 98/98SE/ME/2000/XP operating system.

• USB Memory reader/writer or PC with a USB port.

• The file system of a USB memory is FAT. (FAT32 is not applied)

• Use the USB memory without other functions. (Lock and memory reader...etc)

2.2.2 Preparations

To upgrade the main software, it is necessary to get ready the USB Memory for version upgrade before you start.

Follow the steps below and create the USB Memory for version upgrade.

1. Copy the file BFN_M_xxxAx.bin for version upgrade to the root directory (folder) of the USB Memory.

NOTE: In the USB Memory drive, do not store other folders or unrelated files, or more than one file for version upgrade.

Now the USB Memory for version upgrade is ready.

2.2.3 How to upgrade the software

1. Unplug the AC cord.

2. Insert the USB Memory for version upgrade (prepared as above) into the service socket located Right side of Main Board terminals, under INPUT3

terminal.

3. Plug in the AC cord with power button pressed down after 5 seconds, releases the power button.

Содержание AQUOS LC-40D68UT











































































Результаты поиска

Содержание AQUOS LC-40D68UT

Отзывы:

Похожие инструкции для AQUOS LC-40D68UT

Бренды по названию

Популярные бренды

Sharp AQUOS LC-40D68UT, Руководство по обслуживанию

Результаты поиска

Содержание AQUOS LC-40D68UT

Отзывы:

Похожие инструкции для AQUOS LC-40D68UT

Бренды по названию

Популярные бренды