Sharp Aquos LC-37SH20U, Руководство по обслуживанию

Страница: 10 / 25

LC-37SH20U
10
INPUT SOURCE
TV INPUT1 INPUT2 INPUT3 INPUT4
Connecting HDMI equipment
You can use the INPUT 4 terminal when connecting HDMI equipment
.
HDMI cable (Commercially
available)
Press
/
/
/
to select the desired
setting and press
ENTER
.
NOTE
•
Refer to your external equipment operation manual for the
signal type.
Using external equipment
When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 4.
HDMI equipment
Displaying an image from HDMI equipment
To watch an HDMI equipment image, select "INPUT4" from "INPUT SOURCE" menu using
INPUT
on the remote control unit or on
the TV. Press
MENU
and the MENU screen displays.
Press
/
to select "Option"
.
Press
/
to select
“HDMI Setup
”, and then
press
ENTER
.
Press
/
to select the desired item and
press
ENTER
.
1 2 3 4
5 6
HDMI Setup items
Selectable
item
s
Description
Signal Type Auto View Audio Select
RGB/YCbCr 4:4:4/ YCbCr 4:2:2 Digital/Analog
Select the video signal type from the HDMI terminal.
Set whether or not to use View Mode based on signal recognition, including an HDMI signal
.
Select "Digital"
” for an audio
signal via the HDMI terminal. Select "Analog" for an audio signal via the R-AUDIO -L terminal
.
MENU
[Option
...
HDMI Setup
]
Option
Digital Noise Reduction Output Select Audio Only Quick Shoot
[Fixed]
HDMI Setup
[Low
]
Press
MENU
to exit.
7
[O
ff]
Enable/Disable
Pictur
e
Setup Audio Option Power Cont
ro
l
Digital Setup
ENTER
: Select
:
Enter
MENU
: Exi
t
RETURN
: Back
Menu items
List of menu items to help you with operations
Basic adjustment settings
Backlight Contrast Brightness Color Tint Sharpness Advanced
Color Temp. Black 3D-Y/C Monochrome Film Mode
EZ Setup CH Setup Antenna Setup-DIGITAL Input Skip Input Label Parental CTRL Position Picture Flip Standby Mode Language Reset Treble Bass Balance Surround Audio Only Digital Noise Reduction Input Select HDMI Setup Output Select Quick Shoot Color System Caption Setup Program Title Display Favorite CH No Signal Off No Operation Off Audio Setup
Menu operation buttons
Use the following buttons on the remote control to operate the menu. MENU:
Press to open or close the menu screen.
///:
Press to select a desired item on the
screen or adjust a selected item.
ENTER:
Press to go to the next step or complete the setting.
RETURN:
Press to return to the previous step.
The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.