Sharp Aquos LC-32SH330E, Руководство по эксплуатации

Страница: 20 / 34

HDMI overscan
When you watch TV via HDMI input source, you could
use this function to enlarge the picture. It may have few
loss of video content.
1�
Press
MENU on the remote control and select
Features > HDMI Scan info
2�
Press
≤≥
to select one of the following:
• Select Auto to scan the picture automatically.
• Select Underscan to disable.
• Select Overscan to activate.
3�
Follow the on-screen instructions to exit.
Manual OAD Download
When you get the software updating news from the
retailer or internet, you can update the operation
software using the OAD (Over Air Download)
Download. The updated software data will be
transferred through the TV signal.
1�
Press MENU on the remote control and select
Features
≥
OAD
≥
Manual OAD Download.
2�
Press OK or
≥
to enter.
3�
Follow the on-screen instructions to download
the updated software.
NOTE
• Please do not switch off the TV during the downloading
process.
No Signal Off
When set to “On”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations
or other signals.
No Operation Off
The TV will automatically enter standby mode if no
operations are performed in three hours if “On” is
selected.
NOTE
• Five minutes before the TV enters standby mode, the
remaining
time displays every minute.
TV menu
Reset Default
When you activate the Reset Default , the TV enters to
first time installation.
1�
Press MENU on the remote control and select
Features
≥
Reset Default.
2�
Press OK or
≥
to enter.
3�
Select OK and press OK on your remote
control to confirm.
4�
Follow the on-screen instructions to reset your
TV settings.
DivX® Setup
This is the function to confirm your registration code.
You need to register the code at www.divx.com.
E
DivX® Registration (VOD)
You can find your registration code on this menu. You
need to register the TV at www.divx.com before playing
the DivX® content.
1�
Press MENU on the remote control and select
Features
≥
DivX® Registration.
2�
Press OK or
≥
to enter.
3�
Follow the on-screen instructions to exit .
E
DivX® Deactivation (VOD)
You can find your deactivation code on this menu. You
need to deactivate the TV at www.divx.com to release
the registration.
1�
Press
MENU on the remote control and select
Features
≥
DivX® Deactivation.
2�
Press OK or
≥
to enter.
3�
Follow the on-screen instructions to exit.
SW Ver�
Display the Software version.
1�
Press MENU on the remote control and select
Features
≥
SW Ver.
2�
Press OK or
≥
to enter.
3�
Press
<>
to look for the software version
information.
19