background image

View Mode

Side Bar

S. Stretch

Zoom

Stretch

37

Useful adjustment settings

Press

VIEW MODE

 or 

D

/

E

 while the View 

Mode menu is displayed to select a desired 
item on the menu .

•  You can sequentially select a View Mode that has 

its own aspect ratio.

View Mode for 4:3 Programs

Stretch:

This mode is useful for 1.78:1 
DVDs.
When viewing 1.85:1 DVDs, stretch 
mode will still show very thin black 
bands at the top and bottom of the 
screen.

Press

VIEW MODE

.

•  The View Mode menu displays.
•  The menu lists the View Mode options selectable 

for the type of video signal currently being 
received.

Side Bar:

Suitable for viewing conventional 
4:3 programs in their normal 
format.

S.Stretch (Smart stretch):

Suitable for stretching 4:3 
programs to fi ll the screen.

Zoom:

Suitable for viewing wide-screen 
2.35:1 anamorphic DVDs in full 
screen.

1

2

View Mode for HD Programs

The following modes are available for HD programs.

Stretch:

Suitable for viewing wide-screen 1.78:1 aspect ratio 
program, stretch mode will still show very thin black 
bands at the top and bottom of the screen.

Dot by Dot (1080i/p only):

Detects the resolution of the signal and displays an 
image with the same number of pixels on the screen. 

Full Screen (720p only):

You can select "Full Screen" only when receiving a 
720p signal.

S.Stretch (Smart stretch):

Suitable for stretching 4:3 programs to fi ll the screen.

Zoom:

Suitable for viewing wide-screen 2.35:1 aspect-ratio 
programs in full screen.

NOTE

•  When using Dot by Dot, it is possible to see noise or 

bars around different outer portions of the screen. Please 
change view mode to correct this.

Содержание Aquos LC-32GP1U































































Отзывы: