Sharp Aquos LC-32FB500E, Руководство по обслуживанию

Страница: 16 / 76

16
SERVICE ADJUSTMENTS
1. Adjustment method after PWB and/or IC replacement due to repair
The unit is set to the optimum at the time of shipment from the factory.
If any value should become improper or any adjustment is necessary due to the part replacement, make an adjust-
ment according to the following procedure.
1.1. Procure the following units in order to replace the main unit:
MAIN UNIT DUNTKF470FMxx
NOTE: [Caution when replacing ICs in the main unit (IC1901, IC1902, IC1006 and IC1007)]
Before replacing the relevant part, procure the following parts in which the data have been rewritten.
Ref. Description Parts code IC + data Description new IC code for service
IC1901 HDMI EDID 1 RH-IXD192WJZZY VHIM24C02W61EY AND DATA LC32FHxx0E_HDMI_1_EDID
IC1902 HDMI EDID 2 RH-IXD193WJZZY VHIM24C02W61EY AND DATA LC32FHxx0E_HDMI_2_EDID
IC1006 HDCP USER
SETTINGS
RH-IXD043WJZZY RH-IXC986WJZZY AND DATA LC32DH500E_HDCP_KEY
IC1007
FLASH
MEMORY
RH-IXD194WJZZY RH-IXC870WJZZY and LC32FH510E_MERGE_1.21
RH-IXD195WJZZY RH-IXC870WJZZY and LC32FH500E_MERGE_1.20
RH-IXD197WJZZY RH-IXC870WJZZY and LC32FH510S_MERGE_1.20
2. Entering and exiting the adjustment process mode. Standard method.
1. By key-unit.
1. Unplug the AC power cord.
2. Press and hold “V-” and “
b
” keys, simultaneously, and then plug the AC power cord.
3. “K” appears on the screen.
4. Press and hold “V-” and “P-” keys, simultaneously.
5. “SHARP FACTORY MENU” appears (see Figure 1).
6. Unplug the AC power cord to exit of adjustments process.
2. By own R/C
1. Turn on the TV set.
2. Press “
b
”,”2”,”5”, “8”, “0” (the time is limited to 5 sec. approx., for enter this code).
3. “SHARP FACTORY MENU” appears (see Figure 1).
4. Press “OK” on lines 5 ~ 12 to go to submenu.
5. Press “MENU” to return to main menu.
6. Press “END” to exit of adjustments mode.
LC-32FH500
LC-32FH510