Sharp Aquos LC-32D44E, Руководство по обслуживанию

Страница: 8 / 142

LC32D44E/S/RU-BK/GY (1st Eddition)
1 – 4
Appendix
Troubleshooting
Problem Possible Solution
• No power. • Check if you pressed on the remote control unit.
If the indicator on the TV lights up red, press .
• Is the AC cord disconnected?
• Check if you pressed on the TV.
• Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (+, -) aligned?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated to remote control sensor?
• Picture is cut off. • Is the image position correct?
• Are screen mode adjustments (4:3 Mode/WSS) such as picture size made
correctly?
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tone.
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting.
• Check the HDMI Setup setting.
• Power is suddenly turned off. • The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• Check the power control setting.
• Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
• No picture. • Is connection to other components correct?
• Is input signal type selected correctly after connection?
• Is the correct input source selected?
• Is non-compatible signal being input?
• Is picture adjustment correct?
• Is the antenna connected properly?
• Is “On” selected in “Audio Only”?
• No sound. • Is the volume too low?
• Make sure that headphones are not connected.
• Check if you pressed on the remote control unit.
• The DTV menu screen is displayed
in monochrome and hard to select
the item.
• Check if “Monochrome” is set to “On”. If so, set it to “Off”.
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV’s
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: -20°C to +60°C.
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in a
safe space for future reference.