Sharp Aquos LC 26D7U, Руководство по обслуживанию

Страница: 65 / 214

65
LC-26D7U
LC-32D7U
LC-37D7U
●
IC4901 (IXB002WJ)
QS driver.
Performs the QS (Quick Shoot) drive for the input signal from the picture quality correction IC (IC4601:IXB001WJ),
according to the temperature parameter setting from monitor microprocessor, and outputs the LVDS signal. Also
controls FIFO (IC4902: RH-IXA986WJZZQ) used for calculation.
●
IC4902 (IXA986WJ)
26-Mbit FIFO.
Memory for operation of IC4901 (IXB002WJ) QS driver IC.
●
IC4903 (26: IXB243WJ / 32: IXB242WJ / 37: IXB228WJ)
EEPROM for storing QS parameters.
Data is read into QS driver on a frame-by-frame basis.
●
IC4501 (IXB003WJ)
LCD controller.
Receives RGB signal of LVDS sent from the QS driver, and outputs image signal (RSDS) to LCD panel. This IC
controls dimmer and creates the control signal of the CS circuit.
●
IC4101 (IXA706WJ)
Gradation reference power supply for TFT LCD. It incorporates a gradation output buffer amplifier 18 circuit, CMOS
buffer amplifier and reference voltage generator.
●
IC2004 (IXA870WJ)
Microprocessor for LCD controller.
Performs OSD control of LCD monitor, detection of panel temperature by the thermistor, setting of temperature
parameter for the QS driver, timing for LCD controller, setting of dimmer data, power supply control, monitoring of
each power supply line, remote control decoding, and OPC control.
●
IC2501 (IX3370CE/MSP3450G)
An IC for decoding voice data.
Decodes S-IF and simultaneously acts as a selector of inputted voice data.
●
IC2702 (AK4586VQ)
24 bit CODEC with built-in 2CH ADC and 6CH DAC. (CODEC is a device that converts analog signal to digital bit
stream.)
It has a 96 kHz, 24 bit compatible built-in DIR (Digital audio receiver).
In addition, it automatically detects non-PCM data stream such as AC-3/MPEG.
CODEC is an electronic circuit, a type of AD/DA converter, that converts analog voice data to digital codes, and vice
versa.
●
IC2700 (NJU26150)
Processor IC consisting of a 24 bit DSP (Digital Signal Processor) core with built-in DIR and various interfaces. It
is activated by downloading a program written on IC2706 (E
2
PROM) to the built-in PRAM.
The internal function is composed of sound delay, BBE and parametric equalizer, and performs digital processing
in the I
2
S format.
It has three input lines (SDI0, SDI1 and SDI2) and three output lines (SD00, SD01 and SD02). Two types of LR clock
(LRI and LRO) and BCK (BCKI and BCKO) establish data transfer on serial data lines.
●
IC2701 (NJU26106)
Digital signal processor to decode matrix-encoded stereo signal (Lt/Rt). On this unit, it functions as the Dolby Virtual.
●
IC2709 (AK4353)
96 kHz, 24 bit compatible stereo CMOS D/A converter with a built-in digital audio transmitter.
●
IC1001 (IXB320WJ)
High performance CPLD (Complex Programmable Logic Device).
Communicates to the display section and operates the system.
It also controls ICs of the entire system.