Sharp Aquos LC-24LE150M, Руководство по обслуживанию

Страница: 13 / 54

LC-24LE150M
6 – 1
CHAPTER 6.
ADJUSTMENT
[1] ADJUSTMENT
[1] ADJUSTMENT PROCEDURE
1. Entering and cancel the adjustment process mode
1) While holding down the INPUT and Volume DOWN keys at the same time, plug in the AC cord to turn on the power. (“K” standing for
inspec- tion process mode is displayed on the upper left position of the screen.)
2) Press the Channel DOWN and Volume DOWN keys at the same time. (The adjustment process mode screen appears.)
3) To cancel it, turn off the power using the Power switch or remote control.
2. Remote controller key operation and description of display in adjustment process mode.
1. key operation
Remote controller key Main unit key Function
CH ( / ) CH ( / )
Changing selected line (UP/DOWN)
VOL (+ / –) / + ( L O V –) Changing selected line setting (+1/-1)
Cursor ( / ) —————— e g a p a g n i n r u T (PREVIOUS/NEXT)
Cursor ( / )
—————— Changing a selected line setting (+10/-10)
INPUT button on remote
controller
INPUT button e l g g o t ( g n i h c t i w s e c r u o s t u p n I switching)
(TV Æ INPUT1 Æ INPUT2 Æ INPUT3 )
ENTER —————— ——————
* Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
3. Software upgrading.
1) Plug off the LCD TV.
2) Insert the USB device to the USB terminal at the LCD TV.
(Make sure that the latest software is installed in the USB device).
3) Hold the LCD TV power key and plug on the LCD TV.
4) LCD TV is on and detecting the USB device.
5) A few seconds later, L E D l i g h t ( o r a n g e ) w i l l b l i n k i n d i c a t i n g the software upgrading.
7) T V w i l l a u t o m a t i c a l l y r e s t a r t w h e n s oftware is successfully installed
8) LCD TV is running with the latest software.
LCD TV ADJUSTMENT ITEM
1. EDID DATA INPUT
No need to input EDID
–
–
–
–
2. SIGNAL ADJUSTMENT
A. PICTURE ADJUSTMENT
Confirmation of signal from generator (setting to spec level)
p - p V 7 . 0
‡
l a n g i s e t i s o p m o C L A P
+
0.02Vp-p (pedestal to white level)
15K Component signal (50Hz) ‡ Y level ‡ 0.7Vp-p
+
0.02Vp-p (pedestal to white level)
Pb, Pr level ‡ 0.7Vp-p : 0.7Vp-p
+
0.02Vp-p
33K Component signal
‡
Y level
‡
0.7Vp-p
+
0.02Vp-p (pedestal to white level)
+
Pb, Pr level
‡
0.7Vp-p
‡
0.7Vp-p
–
0.02Vp-Com