background image

42

Problem

Check item

• The reception may be weak.
• The quality of the broadcast may also be bad.
• Make sure the antenna is facing the correct direction.
• Make sure the outside antenna has not been disconnected.

• Make sure the antenna is facing the correct direction.
• Broadcast waves may be reflected from adjacent mountains or buildings.

• There may be interference from automobiles, trains, high-voltage lines, neon lights, etc.
• There may be interference between the antenna cable and power cable. Try positioning

them further apart.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations and transmission antennas of
amateur radios and cellular phones may also cause interference.

• Use the unit as far apart as possible from devices that may cause possible interference.

The picture is
not sharp.

The picture has
ghosts.

There are
stripes on the
screen or
colours fade.

The picture
shakes.

The picture is
spotted.

Antenna

Troubleshooting (Continued)

Use in hot and cold rooms (locations)

• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This

is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20˚C to +60˚C)

Содержание AQUOS LC-22SV2E



















































Отзывы: