manualshive.com logo in svg

Sharp AQUOS LC-20D42U, Руководство по обслуживанию

Поделиться
Скачать
Sharp AQUOS LC-20D42U Скачать руководство пользователя страница 26

26

LC-20D42U

PUBLIC MODE SETTING PROCEDURE

1. How to start Public Mode

•

 

There are the following two ways to get the public mode setup screen displayed.

1

In the adjustment process mode, turn on "HOTEL MODE". Also press the "CH (

ù

)" and "VOL (+)" keys on

the set at once and turn on the power.

2

1) Press the "INPUT" and "VOL (+)" keys on the set at once and turn on the power.
2) Get the password input screen displayed.

Procedure

•

The input starts with the leftmost digit.

•

Use the numeric keys [1] thru [9] and [0] key on the remote controller.
The other keys are not acceptable.

•

With a numeric-key input, "–" will change to " ". The input position
will move one digit to the right.

•

With all the 3 digits entered, the password will be verified.

3) The 3-digit password is now verified.

The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever
adjustment process settings.)
With any other passwords, the screen changes to the normal mode.

Содержание AQUOS LC-20D42U

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды