ENGLISH
23
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued)
START EZ SE TUP?
CONNECT ANTENNA OR CABL E.
YES
NO
EX I T :
MENU
SELECT :
ENTER :
ENTER
PL EASE WA I T
AUTO PROGRAMMI NG
STOP :
2
STEREO
<
ON A I R
SAP
MONO
PL EASE WA I T
NOW SEARCH I NG T IME
STOP :
CH
VOL
POWER
ENTER
DISPLAY
MUTE
SLEEP
PIC. FLIP
BRIGHT TV/VIDEO MENU
FLASH-
BACK
ENTER/
a
/
b
/
c
/
d
EZ SETUP during the First Power On (Continued)
8
Press
a
/
b
to select “YES”, and press
ENTER
.
If you want to stop the EZ SETUP
process once it has started, press
c
and it will be canceled. If you want to
SET UP again, please refer to pages
43
and
44
on “
SET UP
”.
To cancel EZ SETUP
Press
c
.
The tuner will automatically search for
the broadcasting and cable TV channels.
(The CH No. will automatically increase
when it appears.)
The TV set will automatically search for
EDS signals.
If EDS signals are received, the channel
number and time will be displayed, and
then the screen shown in step 8
appears.
9
Once EZ SETUP is completed, the
lowest channel number memorized will
be displayed.
Note:
•
Do not let the EZ SETUP screen remain unat-
tended for a long time.
•
If EZ SETUP does not memorize all the channels
in your region, please refer to pages
43
and
44
for more information on manually memorizing the
channels using CHANNEL SETTING.
•
It may be difficult to preset when the broadcasting
signals are weak, the channel cycle frequency is
incorrect or the frequency jamming is occurring
around the area. Please refer to pages
43
and
44
for more information on manually memorizing
channels using CHANNEL SETTING.
•
If there are no channels with EDS signals or the
antenna signal is weak, the AUTO CLOCK
Setting may not operate. In this case, a “EDS CH
IS NOT AVAILABLE” message will display and
the mode will change to MANUAL CLOCK
Setting. Refer to page
26
to set the clock
manually.
