background image

35

Antenna

Problem

Check item

• The reception may be weak.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.

The picture is
not sharp.

TROUBLESHOOTING (Continued)

The picture
moves.

The picture is
doubled or
tripled.

• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains or

buildings.

The picture is
spotted.

• There may be interference from automobiles, trains, high

voltage lines, neon lights, etc.

• There may be interference between the antenna cable and

power cable. Try positioning them further apart.

There are
stripes on the
screen or
colours fade.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations or
amateur radios, and cellular phones may also cause
interference.

• Use the unit as far apart as possible from devices that may

cause possible interference.

Cautions regarding use in high and low temperature environments

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear
slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct
sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: –20°C to +60°C)

Содержание Aquos LC-13S1M










































Отзывы: