Sharp AQUOS LB-1085, Руководство по эксплуатации

Страница: 17 / 100

15
Preparation
When using DVI Cable (INPUT 7):
DVI cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
Blu-ray disc player/DVD player
To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the •
equipment to 1080p output.
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
To optical digital input of
external audio devices
Optical fiber cable
(commercially available)
Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI •
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Connecting HDMI Equipment
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI equipment
HDMI-certified cable*
(commercially available)
When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6. •
To enjoy 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI- •
certified cable and set the equipment to 1080p output.
Use a commercially-available HDMI cable complying with HDMI standards. Using a non-standard cable will not
*
function normally, resulting in video not being shown or sound not being produced.
Set the player not to use the HDMI CEC function such as AQUOS LINK. Using the HDMI CEC function may cause
*
malfunction.