Press MANUAL on the remote control unit to display
operation information on the screen.
To search for an item from the table of contents, and to
search for a particular term and to fi nd troubleshooting
information, press
MANUAL
while watching the TV and
then select the applicable item from the manual cover page
that appears.
1
Press
MANUAL
while watching the TV.
This displays the built-in operation manual
screen.
2
When you select contents, its page will be
displayed.
3
You can turn over the page one by one for
these arrow marks.
NOTE
• You can also display the built-in operation manual by selecting
“Information” > “Manual” from the menu screen.
• When USB mode, Home Network mode, or Internet application is
used, can not be displayed the built-in operation manual.
1
2
MANUAL
Appendix
The problems described below are not always caused by malfunctions. Check the TV again before having
the TV serviced.
Problem
Possible Solution
•
No power.
•
Check if you pressed
on the remote control unit.
•
Is the AC cord disconnected?
•
Has the power been turned on?
•
Remote control unit does
not operate.
•
Are batteries inserted with polarity (
e
,
f
) aligned?
•
No picture.
•
Is connection to other components correct?
•
No sound.
•
Is connection to other components correct?
If you forget the password, clear the password using the following procedure.
1
Press
to display the
screen, and then press
c
/
d
to select “Initial setup”.
2
Press
a
/
b
to select “Child lock”, and then press
and the password input screen display.
3
If you enter “3001” using
0
–
9
, the “Child lock” setting menu will be displayed.
4
Press
a
/
b
to select “Set password”, and then press
to set the password.
5
Enter the 4-digit number as a password using
0
–
9
,
and then enter the same 4-digit to confirm. The
new password is now set.
Viewing the Built-in Operation Manual
Содержание AQUOS 4T-B60CJ1U
Страница 46: ......
