Sharp AN-C18MZ, Руководство по установке

Страница: 3 / 20

-2
5
Insert the lens into the projector.
•
As you insert the lens, look inside the win-
dow to make sure that the pin is inserted
into the hole of the lens mount.
6
Slide the lens fastener catch tab in the
direction of “LOCK” until it stops.
•
Be careful not to rotate the lens fastener
ring too tight, as the lens fastener ring will
be difficult to loosen the next time the lens
is changed.
7
Replace the lens housing cover.
•
If the lens housing cover is not secured to
the projector, you will not be able to turn
the power on.
Lens
mount
Pin
Lens fastener catch tab
AN_C18MZ#Lens#_E_p002-005.p65 06.7.28, 2:43 PM 3