Sharp AL-2030, Руководство по обслуживанию, Страница: 53 / 108

AL-2040CS DISASSEMBLY AND ASSEMBLY 8 - 19
1) Open the right cabinet.
2) Remove three screws.
3) Remove one connector from MCU.
4) While tilting down the 2nd connection arm A, pull and remove
the paper feed unit toward you.
∗
When installing, securely insert two bosses C on the machine
side and two bosses D on the paper feed unit side. Be sure to
secure the ground wire B.
∗
Insert the 2nd page feed.
A. Paper sensor
1) Remove the pawl.
2) Remove the paper sensor.
3) Remove the harness.
B. Cassette detection switch
1) Remove the pawl.
2) Remove the cassette detection switch.
3) Remove the harness.
C. Paper feed solenoid
1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
D. Transport roller
1) Remove two E-rings.
2) Remove the transport roller.
∗
Install so that the earth spring A is brought into contact over
bearing B.
1
2
4
B
A
3
2
D
D
C
2
3
1
1
2
3
1
2
3
4
2
1
3
A
B