Sharp AL-1640 - B/W Laser - Copier, Руководство по эксплуатации, Страница: 12 / 60

11
GETTING ST
ARTED
SET-UP
1 Remove all pieces of tape, then open the platen
cover and remove the protective material.
2 Use a coin (or other suitable object) to remove the
screw.
Store the screw in the paper tray as described in
step 6 because it must be used if the copier has
to be moved. (p. 42)
3 Install the TD cartridge.
● For installation of the TD cartridge, see steps 1 and 2 and steps 4
to 7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25.
4
Gently lift and pull out the paper tray until it stops.
5 Remove the pressure plate lock. Rotate the
pressure plate lock in the direction of the arrow to
remove it while pressing down the pressure plate of
the paper tray.
Set-up