Sharp AL-1611 Скачать руководство пользователя страница 68

Страница: 68 / 140

AL-1611/AL-1622

DISASSEMBLY AND ASSEMBLY

11 – 12

11. SPF SECTION <AL-1622 ONLY>

A. Remove the SPF

1) Remove the SPF connector.

Connect the interface harness extended from the SPF, and fix with the
hand screws.

2) Remove the PWB shield plate.

Remove the six screws.

3) Remove the SPF harness and the ring core (included together

with the unit).

Pass the SPF harness through the ring core (2), and connect it to the
main PWB connector (CN11) inside the copier. (3)

Pass the SPF harness through the plate hole from the above and fix it

to the plate with the supplied two hex cap screws. (1)

4) Remove the SPF to copier.

Tilt the SPF backward and insert into the hinge guide.

B. External fitting section

Note: Remove the pawl in the arrow direction.

(3)

(2)

★

Be careful about the direction

of the connector.

(1)

Содержание AL-1611













































































































































Результаты поиска

Содержание AL-1611

Отзывы:

Похожие инструкции для AL-1611

Бренды по названию

Популярные бренды

Sharp AL-1611, Руководство по обслуживанию

Результаты поиска

Содержание AL-1611

Отзывы:

Похожие инструкции для AL-1611

Бренды по названию

Популярные бренды