manualshive.com logo in svg

Sharp AL-1340 - B/W Laser - Copier, Руководство по эксплуатации, Страница: 34 / 46

Поделиться
Скачать
Sharp AL-1340 - B/W Laser - Copier Скачать руководство пользователя страница 34

32

6

Copier trouble?

MISFEED REMOVAL

2

Close the side cover by pressing the round projections near the side cover open
button. The misfeed (

) indicator will go out and the ready (

) indicator will light

up.

B  Misfeed in the fusing area

1

Lower the fusing unit release lever.

Fusing unit release lever

2

Gently remove the misfed paper from under the fusing unit as shown in the illustration.
If the paper cannot be removed, proceed to “

C  Misfeed in the transport area

”.

The fusing unit is hot. Do not touch the fusing unit when removing misfed
paper. Doing so may cause a burn or other injury.

●

Do not touch the surface of the drum (green portion) of the drum cartridge
when removing the misfed paper. Doing so may cause smudges on copies.

●

Do not remove the misfed paper from above the fusing unit. Unfixed toner on
the paper may stain the paper transport area, resulting in smudges on copies.

Содержание AL-1340 - B/W Laser - Copier















































Отзывы:

Нет отзывов