background image

Main code

Sub code

Contents

51

2

Resist amount adjustment
(Outline)
The contact pressure of paper onto the resist roller and the RSPF resist roller is adjusted.
(Operation/Procedure)

1. When this simulation is executed, the currently set value is displayed.
2. For a machine with a multi manual paper feed unit installed, when the copy mode select key is

pressed, each set mode and display are changed.
For a machine with a single manual paper feed unit installed, when the copy mode select key
is pressed, each set mode and display are changed.

Machine with a multi manual paper feed unit

Machine with a single manual paper feed unit

6

SPF exposure correction amount adjustment
(Outline)
The APF exposure correction amount is adjusted by adjusting the change in Vref voltage for the
OC mode.
(Operation/Procedure)

1. When this simulation is executed, the currently set value is displayed.
2. Enter the adjustment value with the 10-key and press the start key. The entered value is

stored and a copy is made.

When the adjustment value is changed by 1, the D/A output is changed by +1 digit (dark)
for OC exposure. When it is changed by –1, the output is changed by –1 digit (light).

3. When the clear key is pressed, the entered value is stored and the simulation mode is

terminated.

64

1

Self print by the engine only (1 by 2 mode)
(Outline)
Used to print in the 1 by 2 mode by ignoring the state of the optical system.
(Operation/Procedure)

1. When this simulation is executed, warming up is made and the ready lamp is lighted.
2. Select with the cassette select key and press the start key. Paper is fed from the selected

cassette and printing is performed.

In the 1 by 2 mode, one line is printed and two lines are not printed.

Adjustment mode

Display lamp

Main cassette paper feed

AE, main cassette lamp

2nd cassette paper feed

AE, 2nd cassette lamp

Manual paper feed

AE, manual paper feed lamp

RSPF document feed

AE, TEXT, PHOTO lamp

Adjustment mode

Display lamp

Main cassette paper feed

AE, main cassette lamp

Manual paper feed

AE lamp (Blinking)

RSPF document feed

AE, TEXT, PHOTO lamp

AL-1250

7-4

Содержание AL-1020































Отзывы: