ENGLISH
EN-4
LOADING BATTERIES
1
Remove the battery cover.
2
Insert two batteries.
(AAA(R03))
Make sure the (+) and (-) polarities are
correctly aligned.
3
Reinstall the battery cover.
4
Press the RESET button using a
thin stick.
NOTE:
• The battery life is approximately 1 year in
normal use.
• Replace the batteries when the remote control
displays “ ”.
• When replacing the batteries, always change
both and use the same type.
• If you will not be using the unit for a long time,
remove the batteries from the remote control.
DISPLAY
USING THE REMOTE CONTROL
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the
receiver window and press the desired
button. The unit generates a beep when
it receives the signal.
• Make sure nothing, such as curtains, block the
signal receiver window.
• The signal effective distance is 7 m.
CAUTION:
• Do not expose the receiver window to direct
sunlight. This may adversely affect its operation.
• Use of certain
fl
uorescent lamp in the same
room may interfere with transmission of the
signal.
• Do not leave the remote control in direct
sunlight or near a heater. Protect the remote
control from moisture and shock.
Battery cover
RESET button
1
SUPER JET Symbol
2
MODE Symbols
FAN / AUTO / COOL / DRY
3
BABY MODE Symbol
4
PLASMACLUSTER Symbol
(For Premium models only)
5
SELF CLEAN Symbol
(For Premium models only)
6
ECO Symbols
7
VERTICAL AIR FLOW Symbol
8
BATTERY Symbol
9
BEST SLEEP Symbol
10
TIMER ON / TIMER OFF Indicator
11
TEMPERATURE Indicator
12
TRANSMITTING Symbol
13
FAN SPEED Symbols
: AUTO
: Manual setting
2
1
6
5
4
3
10
9
8
7
11
13
12
7 m
Receiver
window
TINSEB026JBRZ.indb EN-4
TINSEB026JBRZ.indb EN-4
4/28/2560 BE 2:49 PM
4/28/2560 BE 2:49 PM
