background image

PLASMACLUSTER OPERATION

Cluster ions and negative ions are released into the room, keeping air in your room
clean, and help your physical and mental refreshment.

1

During operation, press the PLASMACLUSTER but-
ton to select the mode.

AIR CLEAN

REFRESHING

CANCEL

• In the AIR CLEAN operation, the blue

PLASMACLUSTER lamp on the unit will light up.

• In the REFRESHING operation, the green

PLASMACLUSTER lamp on the unit will light up.

TO CANCEL

Press the PLASMACLUSTER button until
PLASMACLUSTER symbol on the remote control dis-
play goes off.

• The PLASMACLUSTER lamp on the unit will turn off.

1

AIR CLEAN OPERATION : Cluster ions released into air will eliminate airborne mold
fungus and deodorize/decompose odor-causing molecules.
REFRESHING OPERATION : Negative ions released into the air will help your
physical and mental refreshment.

NOTE:

• Setting of the PLASMACLUSTER operation will be memorized and will operate in the same

mode, the next time you turn on the air conditioner.

• To turn off the PLASMACLUSTER Lamp, press the DISPLAY button.

E-11

1

Press the ONE-HOUR OFF TIMER button.

• The remote control displays “ 

  ”.

• The orange TIMER lamp ( 

 ) on the unit will light up.

• The unit will stop operating after one hour.

TO CANCEL

Press the CANCEL button.

• The orange TIMER lamp ( 

 ) on the unit will turn off.

Or, turn the unit off by pressing the ON/OFF button.

• The red OPERATION lamp ( 

 ) and the orange TIMER

lamp ( 

 ) on the unit will turn off.

1

When the ONE-HOUR OFF TIMER is set, the unit will stop operating after one hour.

ONE-HOUR OFF TIMER

NOTES:

• The ONE-HOUR OFF TIMER operation has priority over TIMER ON and TIMER OFF

operations.

• When the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will

operate for an hour with the formerly set condition.

• If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER

activiates, press the ONE-HOUR OFF TIMER button again during operation.

MODE

TEMP.

FAN

TIMER

DISPLAY MODE

FAN

1h

SWING CANCEL

MODE

TEMP.

FAN

TIMER

DISPLAY MODE

FAN

1h

SWING CANCEL

Содержание AH-AP09CF





















Отзывы: