background image

2

PRECAUTIONS

WARNINGS FOR USE

1

Do not pull or deform the power supply cable. Pulling and misuse of the power supply
cable can result in damage to the unit and cause electrical shock.

2

Be careful not to expose your body directly to the outlet air for a long time.  It may affect
your physical conditions.

3

When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.

4

Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.

5

Ground the air conditioner without fail.  Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire.  Incomplete grounding may cause
electric shock.

6

If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.

7

Follow local rules and regulations for power supply cabling.  Improper cable connection
can cause the power supply cable and the electrical outlet to overheat and cause fire.

8

Use only the manufacture recommended power supply cable for replacement.
Replacement should be performed by a qualified technician or a service person.

WARNINGS FOR INSTALLATION / REMOVAL / REPAIR

• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric

shock, water leak, fire etc.  Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/
EEC as amended by 93/68/EEC.

AY-XM09BEp/m

01.4.16, 3:45 PM

2

Содержание AE-XM18BE





















Отзывы: