Sharp AE-A18GR, Руководство по эксплуатации

Страница: 8 / 100

1
Remove the battery cover at the back
of the remote control.
2
Insert batteries in the compartment,
making sure the
±
and
—
polarities are correctly aligned.
• Lines will be indicated on the dis-
play when batteries are properly in-
stalled.
3
Reinstall the battery cover.
4
Press the RESET button using a thin
stick.
USING THE REMOTE CONTROL
E-6
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, press
the RESET button using a thin stick.
• If you will not be using the unit for a long time, remove the batteries from the
remote control.
Point the remote control towards the
unit’s signal receiver window and
press the desired button. The unit
generates a beep when it receives
the signal.
• Make sure there is no curtain or other
object between the remote control and
the unit.
• The remote control can send signals from
up to 7 metres away.
LOADING BATTERIES
Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
Remote control
cover