10
Plug power supply cord into a standard 3-pronged
14 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container, open
the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is firmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation.
Each time a pad is touched, a BEEP will sound to
acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “
” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CANCEL pad is touched during the
oven operation, the oven stops cooking and all
information retained. To erase all information(except
the present time), touch the STOP/CANCEL pad
If the START
pad is
touched
and
the
oven
does
not
operate, check the area between the door
and door
seal for obstructions and make sure
the door is closed securely. The oven will not start
cooking until the door is completely closed or the
program has been reset.
1
2
3
4
5
6
7
8
1
9
10
11
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAgE OUTPUT CHART
•
The power-level is set by touching the Power pad once,then press number keys to choose the level you need.
The chart shows the display, the power level and the percentage of power.
O P E R A T I O N P R O C E D U R E
This section includes useful information about oven operation.
T O U C H T H E N U N M B E R P A D
P O W E R L E v E L ( D I S P L A Y )
A P P R O x I M AT E P E R C E N TA G E O F P O W E R
PL10
100%
PL9
90%
PL8
80%
PL7
70%
PL6
60%
PL5
50%
PL4
40%
PL3
30%
PL2
20%
PL1
10%
oven operation, all information is retained.
once more. If the oven door is opened during the
0:00
/+30 SEC
Default
9
8
7
6
5
4
3
2
1
shut off.
The oven will automatically
